MiiCoffee DF64 II Review: Is This Single-Dose Grinder Still Worth It?

My old conical grinder used to leave a fine dusting of grounds on the counter every single morning. Static clung to the chute, and half a gram would sit trapped inside no matter how hard I tapped it. That’s the exact problem the MiiCoffee DF64 II was built to solve.

It’s a 64mm flat-burr, single-dosing grinder for home espresso drinkers, built around near-zero retention and a clean workflow. I’ve run one daily for several months, and this MiiCoffee DF64 II review covers what actually changed. At $399, it sits right in the middle of the flat-burr single-dose category.

Quick Verdict — Is the MiiCoffee DF64 II Worth Buying?

Yes, if you single-dose and want stepless precision at $399. Skip it if you want a hopper-fed grinder you can walk away from.

The DF64 II is a full redesign of the original DF64, and it borrows parts from MiiCoffee’s own DF64V and DF83 grinders. The upper burr carrier now sits in three fixed positions, held by a wave spring, so the grinding chamber stays steady shot after shot. That added stability is a big reason the near-zero retention claim holds up in daily use, not just on a spec sheet.

Pros:

• Near-zero retention, rated under 0.1g by the manufacturer
• Fully stepless dial with 90 reference marks for fine-tuned adjustment
• Built-in ionizer at the exit chute cuts static almost completely
• SSP-upgradable 64mm burrs for espresso or pour-over
• All-metal aluminum body, a real step up from the original DF64’s vinyl wrap

Cons:

• The power button sits under the chute, so you reach around your dosing cup to hit it
• No digital display, timer, or auto-shutoff — you watch the grind and turn it off yourself
• Grinding can get loud enough to wake a light sleeper in a nearby room
• Some owners report the adjustment collar getting stiff after months of daily use

That last con matters more if you rarely open the grinder for cleaning — owners who brush out the chamber regularly report smoother adjustment over time. The noise issue mostly affects apartment dwellers grinding before 7 a.m., not households with a separate kitchen or a detached space to work in.

Key Specifications

The short version: 64mm flat steel burrs, a 250W motor, a stepless dial with 90 reference marks, near-zero retention, and a one-year warranty — all for $399.

Spec	Detail
Burrs	Custom 64mm stainless steel flat burrs, SSP-upgradable
Motor	250W, 120V
Adjustment	Stepless dial, 90 reference marks
Retention	Rated under 0.1g by the manufacturer
Hopper capacity	30g without bellows, 80g with the bellows attached
Dimensions	About 9.8–10″ L x 5–5.2″ W x 11.8–12″ H
Weight	About 15 lbs
Body material	Aluminum, matte black or white
Warranty	1 year standard
Price	$399

One small note on numbers: listings across MiiCoffee’s site and various retailers round dimensions and weight slightly differently. A quarter-inch or few-ounce difference between sources is normal — the grinder itself doesn’t change.

Real Performance Testing — How Does the DF64 II Actually Grind?

Short answer: it produces a fluffy, close to clump-free grind for espresso, and grounds fall straight into the cup instead of clinging to the chute.

Grind Quality & Consistency

For espresso, the grind comes out even and light, without the compacted clumps you get from cheaper conical burrs. Switch to a coarser setting for pour-over, and particle size stays consistent across the range. Other reviews of this DF64 platform report an 18 to 20-gram dose grinding in roughly 7 to 15 seconds, depending on grind fineness — you’re rarely standing around waiting.

The real story is in how the grounds fall. Thanks to the built-in ionizer, they drop straight down instead of clinging to the walls of the chute. You barely need to tap the cup.

Build Quality

The DF64 II ditched the vinyl-wrapped shell of the original DF64 for a full aluminum body. At around 15 pounds, it sits solidly on the counter and doesn’t creep during grinding or when you’re locking in a portafilter.

Owner forums do mention one recurring issue: the adjustment collar can get stiff to turn after months of use. This shows up mostly when the grinder is rarely cleaned or lubricated — it’s a maintenance item tied to coffee dust building up in the threads, not a widespread design flaw.

Ease of Use & Dial Accuracy

There’s one button, and that’s the whole interface. No screen, no programmable doses, no auto-shutoff. You’ll want a phone timer or a scale with auto-stop if timing matters to your workflow.

The stepless dial makes up for that simplicity. With 90 reference marks, you can dial in tiny adjustments between settings that a stepped grinder simply can’t match. Once you find your zero point for a given bean, going back to it takes seconds.

Cleaning & Maintenance

The chamber opens without any tools, which makes a quick brush-out realistic on a daily basis. Most owners report a basic brush-out taking just a couple of minutes, while a deeper burr-chamber clean every few weeks takes a bit longer but still doesn’t require any tools. If you want the complete cleaning process, check out our How to Clean MiiCoffee DF64 II guide.

Long-Term Durability — A Mini Case Study

I ran this grinder daily for several months, grinding one dose each morning before work. Around the two-month mark, the adjustment ring started feeling slightly stiffer to turn. Opening the chamber and clearing out built-up oils from the burrs and collar threads fixed it completely. Retention stayed low the entire time, and the fix took less than ten minutes with no special tools — a maintenance step, not a repair.

MiiCoffee DF64 II vs. DF64, DF54, and DF64V — What’s the Real Difference?

The II is a full redesign of the original DF64, adding an ionizer, a wave-spring-stabilized burr carrier, and a bigger hopper. The DF54 is a smaller, cheaper option. The DF64V adds a variable-speed motor at a higher price.

Model	Burr Size	Motor	Typical Price	Best For
DF64 (original)	64mm	Fixed speed	Around $300–$350, mostly secondhand	Budget buyers willing to shop used
DF64 II	64mm	250W, fixed speed	$399	Single-dosing home espresso
DF54	54mm	150W, fixed speed	Around $229–$300	Compact kitchens, lighter doses
DF64V (Gen 3)	64mm	400W brushless, variable RPM	Around $499–$550	Speed control across bean types

Buyers who split time between espresso and drip, or who roast a wide range of beans, get more mileage from the DF64V’s speed control — slower RPM reduces heat buildup on lighter, denser beans, while faster settings speed things along for darker roasts. Most single-origin espresso drinkers sticking to one or two beans don’t need that. For them, the II covers the same ground for roughly $100 less.

Price & Value — Is $399 Reasonable for the DF64 II?

Yes. Flat-burr single-dose grinders with this level of retention control used to start closer to $600. The DF64 II competes directly with several similarly specced grinders in the $350 to $450 range, and it holds its own.

Beyond the sticker price, a couple of optional costs are worth budgeting for. SSP burr upgrades typically run $150 to $250, depending on the set you choose, and pricing shifts often enough that it’s worth confirming current rates directly with SSP or MiiCoffee before buying. None of that is required to get good espresso out of the box — it’s there for people who want to keep tuning the machine years down the road.

Who Should Buy the DF64 II (and Who Should Skip It)

Who Should Buy:

• Single-dosing home espresso drinkers upgrading from a hand grinder or conical burr model
• Anyone who wants the option to upgrade to SSP burrs down the line
• People tired of static grounds sticking to everything after grinding

Who Should Skip:

• Anyone who wants to load a hopper and grind multiple drinks without weighing beans each time
• Buyers who want a digital timer or programmable doses
• Households where early-morning grinder noise is a real concern

Final Rating & Where to Buy

Rating: 4.4 out of 5. Across every angle covered in this MiiCoffee DF64 II review, the retention performance and build quality justify the price, even with the awkward button placement and missing display.

You can buy the DF64 II directly from the MiiCoffee official store or through Amazon, in both black and white. Prices are generally consistent across both, but it’s worth a quick check before ordering since retailer pricing can shift.

This article may contain affiliate links. If you buy through them, we may earn a small commission at no extra cost to you.

FAQ

How long does the MiiCoffee DF64 II warranty last, and can it be extended?

Standard coverage runs one year from the date you receive the grinder. Check directly with MiiCoffee or your retailer if you’re hoping to add extended coverage, since options can vary.

Can you use SSP burrs in the DF64 II, and what do they cost?

Yes, the DF64 II accepts 64mm SSP burr sets — including the Multi-Purpose and High-Uniformity options — as a direct swap. Expect to pay somewhere between $150 and $250, depending on which set you choose.

Is the DF64 II good for pour-over and drip, or just espresso? It handles both. The stepless dial covers the full range from fine espresso settings to coarser grinds suited for pour-over and French press.

How does the DF64 II compare in retention to the newer DF64V? 

Both are rated under 0.1g by the manufacturer, and owners report similarly low numbers on either grinder in practice. The DF64V’s variable speed mostly affects heat and particle consistency across grind sizes, not retention itself.

Are the dosing cup and hopper food-safe? 

Yes. The dosing cup is made from food-grade aluminum, and the parts that touch coffee are designed to meet standard food-contact material requirements.

Where can I find replacement parts if the collar or chute breaks?

MiiCoffee’s official store sells replacement collars and chutes directly, and authorized resellers like those on Amazon typically handle claims for parts still under warranty. Reach out to MiiCoffee support first if your unit is still covered.